• The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received. 34 YDP-123 Appendix/Anhang/Annexe/Apendice 4. 4. E 6. SYSTEM EXCLUSIVE MESSAGES Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number YDP-123 MSB LSB P.C.# Grand Piano 1 0 122 0 Grand Piano 2 0 112 0 E.Piano 1 0 122 5 E.Piano 2 0 122 4 Harpsichord 1 0 122 6 Harpsichord 2 0 123 6 Vibraphone 0

Any expenses involved in the removal, reinstallation or transportation of the product are not covered by this warranty. The product must be returned to Attwood’s plant at the address above, postage prepaid, and insured with proof of original purchase including date. If Attwood is unable to replace the product and repair is not commercially practical or cannot be timely made, or if the original consumer purchaser is willing to accept a refund in lieu of repair or replacement, Attwood may refund t

Route wires out of the way and secure them to the bulkhead to avoid pulling. 3. Using butt connectors sized for 16-gauge wire, splice fuse holder into positive lead (brown) between the battery and switch. Position fuse holder in a location that is easily accessible for changing fuses. IMPORTANT: Use fuses of the proper amperage (See Specification Chart at top of sheet). WARNING: FAILURE TO PROPERLY FUSE AND MAKE THE APPROPRIATE WATERPROOF CONNECTIONS WILL VOID THE PRODUCT WARRANTY. 4. Install a

See or Product Catalog for details. CAUTION: Read all instructions carefully before installing and using this product. This pump is sealed and, therefore, submersible. However, the electrical wire connections must not be submerged. For extra protection, coat the butt joints and adjacent wire ends liberally with liquid electrical tape such as MDR® or Starbrite®. Specifications ABYC Specifications ISO Specifications 13.6-volts DC 12.0-volts DC (GPH=Gallons Per Hour) (LPH=Liters Per Hour) 0 ft. 3.3

1. Make sure the hull thickness is at least 1/2" thick. If not, place a block of 1/2" marine plywood (slightly larger than pump base) in the lowest part of the bilge. Be sure that the pump cover can be removed for cleaning in this position. Glue the plywood to the hull with a waterproof adhesive (epoxy, silicone adhesive, or fiberglass resin). See Figure 1. Figure 1 Float End Pump Outlet Transom Of Pump Pointing To Transom Toward Bow Level Parallel To 1/2" Thick Bottom Of Boat Mounting Block 2.

REFER SERVICING TO QUALIFIED literature accompanying the appliance. magnitude to constitute a risk of electric SERVICE PERSONNEL. shock to persons. D1-4-2-3_En WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. D1-4-2-1_En For pluggable Equipment, The Socket-Outlet Shall Be Installed Near The Equipment and Shall Be Easily Accessible. WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to l

Professional X7675 Wireless 4-in-1 Print. Copy. Scan. Fax. MOREPAGES HIGH-YIELDCartridges includedCompared to the combined yields of one 37 color and one 36 black cartridge. l QUALITY: Permanent, highlighter resistant, laser sharp text, crisp graphics vibrant photos with evercolor™2 inks l EFFICIENCY: Save time, money and the environment with 2-sided printing and high yield cartridges l PERFORMANCE: Business class speeds up to 32 ppm (1), 25-page Automatic Document feeder, and built-in wireless

The EverClean™ antimicrobial system incorporates AlphaSan®, a patented antimicrobial agent manufactured right into the circulation system components, which suppresses the growth of unsightly algae, fungus, mold and mildew. □ Model# 7236L.002 Bathing Pool Only Nominal Dimensions: 72” x 36” x 21-1/4” (1829 x 914 x 540mm) Compliance Certifications - Meets or Exceeds the Following Specifications: • Underwriters Laboratories - Hydromassage Bathtubs UL 1795 • ASME A112.19.7M for Whirlpool Appl

It will not heat cold water to desired bathing temperature. SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS AlphaSan® is a registered trademark of Milliken & Co. © 2007 American Standard Inc. HD-3 Revised 7/07 Amm'com Standard LIFETIME™ 6’ X 36" WHIRLPOOLS BY AMERICAN STANDARD HIGH GLOSS ACRYLIC OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7. GENERAL SPECIFICATIONS FOR 7236L WHIRLPOOL INSTAIIFD SI7F 72 x 36 x 21-1/2 In (1829 x 914 x 546mm) WEIGHT

The EverClean™ antimicrobial system incorporates AlphaSan®, a patented antimicrobial agent manufactured right into the circulation system components, which suppresses the growth of unsightly algae, fungus, mold and mildew. □ Model# 7236L.002 Bathing Pool Only Nominal Dimensions: 72” x 36” x 21-1/4” (1829 x 914 x 540mm) Compliance Certifications - Meets or Exceeds the Following Specifications: • Underwriters Laboratories - Hydromassage Bathtubs UL 1795 • ASME A112.19.7M for Whirlpool Appl