WS-1X Installation .IMPORTANTE! Lea este manual de instalacion completo para garantizar una instalacion adecuada. Una vez que termine la instalacion, entregue este manual al propietario o al Departamento de Mantenimiento. Cumplir los codigos y las ordenanzas locales y apegarse a ellos es responsabilidad del instalador. Saque las piezas del embalaje y asegurese de haberlas sacado todas antes de desecharlo. Si falta alguna pieza, no comience la instalacion sino hasta obtenerla. Asegurese de purgar

Main water supply to the unit should be ON at all times. This installation manual and parts list should be filed by the owner’s maintenance department. Installation Instructions WF2605, WF2608 Terrazzo WF2705, WF2708 Stainless Steel Classic Circular 36"/54" Washfountain with Foot Control 215-603 Rev. M; EN 06-915B © 2007 Bradley Corporation Page 1 of 28 4/6/2007 P.O. Box 309, Menomonee Falls, WI 53052-0309 TEL. 1-800-BRADLEY FAX 262-251-5817 Table of Contents Pre-Installation Information . . . .

Reassemble the operating rod as shown in Figure 12. Reinstall and adjust so that the foot valve is completely open when the foot lever is fully depressed. This prevents damage to the foot valve due to the absence of the override spring. 3. Turn supplies on and activate the sprayhead. Check piping installation for leaks. 4. Clean the sprayhead if necessary. See page 22 for sprayhead troubleshooting. Adjust the volume control valve, if necessary, to control the flow of water. Figure 12Figure 11 4/

For more than three washfountains, pipe sizes should be increased proportionately. -Supplies from below or through wall - Vented through ceiling off trap inside pedestal Type O Drain -Supplies from above - Vented from below or through wall off drain (mm) Figure 2d NOTE: Supply lines for one to two washfountains should be 1”; for three washfountains, 1-1/4”. For more than three washfountains, pipe sizes should be increased proportionately. Bradley Corporation • 215-1470 Rev. H; EN 06-915 2/8/07 T

. . . . . . . . . . . . . . . .2 Model TDB3104 Washfountain Dimensions . . . . 3 Model WF3204 Washfountain Dimensions . . . . . .4 Washfountain Rough-Ins . . . . . . . . . . . . . . . . . .5-7 Drain Installation . . . . . . . . . . . . . . . . . . . . . . . . . .8 Bowl/Pedestal Mounting and Assembly . . . . . . . .9 Drain Spud Installation . . . . . . . . . . . . . . . . . . . . .10 Air Valve Installation (A/O drains) . . . . . . . . .11-12 Air Valve Installation (B/H drains) . . . . . . . . .13

. . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Supplies Required . . . . . . . . . . . . . . . . . . . . . . . .2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Rough-Ins and Installation . . . . . . . . . . . . . . . . . .4 Cleaning and Maintenance . . . . . . . . . . . . . . . . .5 LD-3071-3 shown LD-3072-3 shown IMPORTANT! Read this entire installation manual to ensure proper installation. When fi nished with the installation, fi le this manual with the owner

A: 8" (203mm) Faucet mount - left of vessel Dim. A: 6-1/2" (165mm) Faucet mount - right of vessel Dim. A: 9-1/2" (241mm) 1 Rough-Ins The vessel sinks are pre-mounted to the deck prior to shipping. Apply construction adhesive to Terreon® mounting strips Installation LD-3071/STD, LD-3072/STD Cleaning and Maintenance for Terreon® Material Description: Terreon® is an NAHB Certified densified solid surface material composed of polyester resin and is resistant to chemicals, stains, burns and impact. S

. . . . . . . .76 Limpieza/mantenimiento de la fibra de vidrio revestida de gel . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Limpieza/mantenimiento del acero inoxidable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Repuestos de la valvula del dispensador de jabon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78-79 Recomendaciones y mantenimiento del jabon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wall anchors used must have a minimum pull-out rating of 1,000lbs. Product warranties may be foundunder "Product Information" on our web site at Installation Instructions OBSOLETE SS-3/AST/WH97TAS Express® LavatorySystem SS-Series *Complies with Texas Accessibility Standards (TAS) for Juvenile Height applications. Table of Contents Pre-Installation Information . . . . . . . . . . . . . . . .2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4 Installation Instructions . . . . .

. . Bradley Corporation • 215-1243 Rev. E; EN 08-805 4/24/08 Express® Lavatory System SS-Series SS-2/IR/STD, SS-2/IR/JUV Installation - Obsolete Installation Instructions continued . . . Step 2: Mounting frame to wall 1. Remove the eight Torx-head screws securing the panel to the frame, and remove the panel (see Figure 3). Note: Scuff panel does not need to be removed. 2. Position the frame against the wall, ensuring that it is level. If necessary, insert shims under the frame until level. Note: