(13.6 kg). Package contents A Wall plate (1) B TV bracket (1) C Locking bar (1) M4 Bag D M4 . 12 mm screws (4) E M4 . 30 mm screws (4) F M4 spacers (4) G M4 washers (4) Lag Bolt Bag H Concrete wall anchors (2) I 1/4 in. . 2. in. lag bolts (2) 1 Attach the TV bracket NOTE: Make sure there will be enough space between the back of the TV and the wall to connect all your cables. You can use the optional M4 spacers to provide additional space. Without spacers: Attach the TV bracket (B) to the back of

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warnings . . . . . .... . . . . .... . . . . .... . . . . .... . . . . .... . . . . .... . . . . .... . . . . .2 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installing and removing the stand . . . . . . . . . . . . . . . . . . . . . .

Connecting to your home network This player can be connected to your wired network using the Ethernet port on the back of your player or using a wireless network. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. There are three types of wireless network connections: • User selects a network form a list of available networks • User uses WIFI protected Setup Connecting to the Inter

VGA AUDIO SPDIF AV IN PC IN Pr Pb ANTENNA / CABLE DIGITAL / ANALOG TV 1 2 3 4 5 6 VGA AUDIO PC IN Cable de VGA Cable de audio Uso de su televisor Configuracion de la lista de canales Despues de seleccionar la fuente de senal de su TV, si selecciono antena o cable necesitara configurar la lista de canales. Cuando configure la lista de canales, su televisor buscara todos los canales disponibles en su area y guardara una lista de estos canales. Cuando presione CH – o CH +, su televisor omitira los

2 DNS Server Test. If this test fails, there may be an issue with your Internet service provider. • Make sure your router is connected to your cable or DSL modem correctly. • Contact your Internet service provider for more help. 3 Internet Connection Test. If this test fails, there may be an issue with your Internet service provider. • Make sure your router is connected to your cable or DSL modem correctly. • Contact your Internet service provider for more help. Using connected applications You

Note: Pay close attention to the direction of the stand. The wide portion of the stand must face the front of the TV. 2 Lay the TV on a flat, cushioned surface. 3 Align the stand with the TV, as shown. 4 Move the stand gently until the locators on the stand column align with the locating grooves on the stand. 5 Align the holes in the stand with the holes in the stand column. 6 Secure the stand to the column with the screws provided Installing a wall-mount bracket 1 Carefully place your TV screen

3 Features............................................................................................ 8 Front ......................................................................................... 8 Back .......................................................................................... 9 Remote control........................................................................ 10 Setting up your TV combo .............................................................. 14 Connecting an ante

Installing the batteries 1 Slide the battery compartment cover down and remove it. 2 Insert three AAA batteries (included) into the compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment. 3 Replace the cover. Setting the time 1 Press and hold the CLOCK SET button for approximately three seconds. The hour digit will flash on the display. 2 Press the TUNE+ or TUNE– button to set the current hour. 3 Press the CLOCK SET button to sa

Enter your model number in the Search field, then press Enter. Click Support/Downloads. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station Using HDMI (best) Using component cables (better) Using composite cables (good) Connecting an antenna/cable wall jack Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your TV and to the Antenna/Cable wall jack. Connecting a Home Theater System Using Digital audio Using Analog audio Front featur

91000051, Revision B This manual is published by DYNEX Technologies, Inc. Questions or comments regarding the content of this manual can be directed to the address below or to your DYNEX Technologies representative. DYNEX Technologies 14340 Sullyfield Circle Chantilly, VA 20151-1683 USA Tel. (703) 631-7800 (800) 288-2354 Fax. (703) 803-1441 OPSYS MWTM is a trademark of DYNEX Technologies, Inc. © 2006 This document is the copyright of DYNEX Technologies and must not be copied or reproduced in any