Iniciar sesión:
Clasificado: Nombre ↑   Descargas   Tarifa   Tamaño ↑  

American Sensor SA379

Descargado: 9Tamaño del archivo: 391 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

This smoke alarm is also interconnectable with up to 11 other units. Important information about your smoke alarm € Install alarms outside of every bedroom area and on every floor of your home. Please refer to Section 3 •Where to Locate Smoke AlarmsZfor details. € Install the alarm as close as possible to the center of the ceiling. € Your Smoke Alarm is packaged with the back-up battery reversed. Connect it before mounting the unit. Ensure proper polarity of the battery. Alarm will •beepZif batt

American Sensor SA360

Descargado: 0Tamaño del archivo: 145 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

ORANGE Interconnect ANY KIND. APPROPRIATE COVERAGE IS YOUR DO NOT PLACE SMOKE ALARMS: RESPONSIBILITY. CONSULT YOUR INSURANCE AGENT. • In turbulent air from fans, doors, windows, etc. The rapid air •Relay Connection This warranty gives you specific legal rights and you may have other movement may prevent combustion particles from entering the rights which may vary from province to province. Model ESA5011 only - The ESA5011 smoke alarm provides one alarm. Form C, normally open/normally closed cont

American Sensor LP405A

Descargado: 22Tamaño del archivo: 315 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

THIS DEVICE IS NOT SUITABLE FOR INSTALLATION IN A HAZARDOUS LOCATION, AS DEFINED IN THE NATIONAL OR CANADIAN ELECTRICAL CODE. Introducing the LP401, LP401A, LP405, LP405A Propane Gas Detector The LP401, LP401 A, LP405, LP405A Propane Gas Detectors are effective products for detecting any build-up of propane gas in your home. Dicon Global Inc., the maker of these propane gas detectors, has been developing and making products for detecting gases since 1985. Your new detector: • Is easy to inst

American Sensor LP405

Descargado: 2Tamaño del archivo: 315 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

Warranty Information Limited Warranty Dicon Global Inc. warrants its enclosed Propane Gas Detector sensor to be free from defects in material and workmanship under normal use and service for a period of five (5) years form date of purchase. Dicon Global Inc. warrants it's enclosed Propane Gas Detector other than the sensor to be free from defects in materials and workmanship under normal use and service for a period of one (1) year from date of purchase. Dicon Global Inc. makes no other express

American Sensor LP401A

Descargado: 4Tamaño del archivo: 315 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

It is normal for this light to turn on once or twice after you power the detector or after a power failure. A G What should you do if the ALARM sounds? EVACUATE IMMEDIATELY! Do a head count to check that everybody is accounted for. Call the nearest fire department and ask them to determine the source of propane gas. Do not re-enter the premises until the problem has been corrected and the propane gas has been dispersed. ! WARNING: Activation of this device indicates the presence of propane g

American Sensor LP401

Descargado: 1Tamaño del archivo: 315 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

The alarm sounds. To reset the alarm, turn the 12 Volt supply off, wait ten seconds, then turn it on again. A. Why should you be concerned about propane gas? Propane gas is a colorless, flammable gas that can be explosive if it escapes and builds up. Propane is stored as a liquid under pressure, so most likely sources of leaks are in the connections to propane tanks for propane-pow-ered heaters, stoves, refrigerators, furnaces, and barbecues. When propane leaks, it becomes a gas and can be i

American Sensor ESA5011

Descargado: 10Tamaño del archivo: 145 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

Determine that the initiating alarm triggers other alarms in the violent explosions, escaping gas, improper storage of flammable next alarm. wire. NOTE: The SA360 and ESA5011 are interconnectable system. with up to 11 other units. materials, overloaded electrical circuits, natural causes such as • In the center of a room or hallway: As it is impossible to predict 7. Model ESA5011: Pressing the test button activates the relay. lightning, children playing with matches, or arson. the source of a fi

American Sensor ESA5010

Descargado: 11Tamaño del archivo: 69 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

ground fault interrupter. It is highly recommended that smoke 3. Press and hold the test button until the alarm sounds. NOTE: It lightning, children playing with matches, or arson. • In the center of a room or hallway: As it is impossible to predict alarms be wired on a separate circuit (one with no other lights or may be necessary to press the test button for up to 20 seconds for anthe source of a fire. If it is necessary to place the alarm on a wall, appliances) to ensure maximum reliability o

American Sensor COS2010

Descargado: 1Tamaño del archivo: 780 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

carbon monoxide in the air, exposure time and health effects. ceiling. A. INTRODUCING THE AMERICAN SENSORS COS2010 • Keep your family in a pre-arranged meeting place after your escape. For most people, mild symptoms generally will be felt after several hours Dirt and Blockage • In high humidity areas such as bathrooms and attics, place at least 10 If you have any questions regarding this unit , call CARBON MONOXIDE & SMOKE ALARM feet (3 m) away from bathrooms. of exposure to 100 ppm of carbon mo

American Sensor CO920

Descargado: 4Tamaño del archivo: 466 kb    Fabricar: American Sensor  
Categoría: Detector de incendios

This will silence the alarm for up to 6 minutes. If the unit re-alarms after reset it confirms the ongoing presence of harmful levels of carbon monoxide. I. How can you replace your back-up battery? How to replace the battery 1. Unplug alarm from outlet; battery is at the bottom on back of unit 2. Push battery to left to remove from plastic spring 3. Remove existing 9 volt battery 4. Insert fresh 9 volt battery into terminals. Push battery and wires back into enclosure. Use only recommended batt





Categoría