sales receipt. (Default Remote Access PIN is 0000) . mode, the change to ANSONLY automatically, and will not allow callers to leave messages, EMC: EN 301489-01: V1.8.1 : 2008; Remember to include the mains adapter. 5. Press

CALL SCREENING .......................................................................................................................... TROUBLESHOOTING....................................................................................................................... 33 DECLARATION OF CONFORMITY................................................................................................. 34 GUARANTEE AND SERVICE.............................................................................

Enter the number for the handset you want to transfer the call to. 3. The external call is put on hold automatically and the called handset rings. 4. Press on the called handset to establish an internal call. 5. Press on the calling handset or put the calling handset on the charging cradle to end the current call with the external party. 6. The external call is transferred to the called handset. Note: If the other handset has not answered the intercom call, you can stop

ALL . DELETE Press the PHONE/OK button 4 . ? 5 Press the PHONE/OK button to delete all entries or the HANG UP/C button to cancel http:/ / 15 • The display shows . DELETE ALL Color profile: Generic CMYK printer profile Composite Default screen Using the Phone Book You can store up to 40 names and numbers in each handset’s Phone Book. Each name can have up to 10 characters (including spaces) and each number can have up to 2 0 digits. To store 1 Press the MENU button names and numbers 2 Press the P

No display. Empty battery Recharge battery Please contact the technical support of the network provider for further information. This telephone is not equipped with an earth function! Therefore some of the functions may be limited when used in PBX systems. If the fault persists: Disconnect all other instruments connected to the same line as this, and try to make a call. Disconnect the base unit from the telephone line and plug a different phone into the master socket. Try making a call. If this

30 8.4.4 CHANGE THE SYSTEM PIN CODE......................................................................... 30 8.4.5 RESET YOUR CORDLESS HANDSET....................................................................... 30 9 REGISTRATION .................................................................................................... 31 10 TROUBLESHOOTING ........................................................................................... 32 11 DECLARATION OF CONFORMITY ..................

Presione < una vez. Para mover el cursor varios caracteres hacia la izquierda: . Mantenga presionado > hasta que el cursor se mueva a la posicion deseada. Para mover el cursor al principio de la linea de texto: . Mantenga presionado f y presione <. TECLA DEL CURSOR DERECHA Para mover el cursor un caracter hacia la derecha: . Presione > una vez. Para mover el cursor varios caracteres hacia la derecha: . Mantenga presionado > hasta que el cursor se mueva a la posicion deseada. Para mover el cursor

Never try to lengthen the mains power cable. Note: The base unit needs mains power for normal operation, not just for charging the handset batteries. 1.2 Installing and charging the batteries 1) Place the supplied battery pack into the battery compartment with the battery plug lully inserted in the socket as shown. Use only the NiMH rechargeable battery type provided. 2) Position the battery compartment cover over the batteries and slide up to click into place. 3) Put the handset on the bas

The cordless phone won’t work if the base unit has no electrical power. Move the handset closer to the base unit. Check the Battery Level symbol on the display. If it is low, replace the cordless handset on the charger pod to recharge the batteries. If you still can’t make calls, try re-registering the handset. “When I press Make sure the batteries are fitted in your handset. If the Battery keys on the Level symbol on the display shows ‘low’, recharge the batteries. handset, nothing happens.” Pr

1 IMPORTANT SAFETY INSTRUCTIONS ................................................................................ 2 1. UNPACKING AND INSTALLATION................................................................................... 3 1.1. Box Contents ...................................................................................................................... 3 1.2. Telephone Part Identification............................................................................................... 4