Make sure to use only water. 13. To refill the product with water during use: ® Unplug the power cord. @ Press the steam button to fully discharge all air held inside. © Wait three minutes for the steam held within to settle and dispel. @ Press the steam button once again to fully discharge all steam remaining inside. © Turn and open the safety cap. 14. The product becomes hot during use. Exercise care when substituting accessories. 15. To provide continued protection against risk of ele

Hold the steam head vents away from you and steam in a vertical up and down motion. This will allow the condensation in the hose to flow back into the steamer. Fig 13 Fig 14 16) Press the Power Button to turn the unit on. Hold the steam head up and facing away from you for the 40 seconds it takes to heat up. once you see that a steady steam vapor is emitted from the steam head, the Steam Station is ready to use. 17) Hold the wand of the steam head firmly and slowly move it across the surface to

basic safety precautions should always be observed, including the following: 1. Read all instructions before using your 17. floor sanitizer. 2. Use the system only for its intended use. 3. Do not use outdoors. 4. Do not leave your floor sanitizer unattended when plugged in. Turn it off and unplug the electrical cord from the outlet when not in use. 5. Do not allow to be used as a toy. Pay close attention when used near children, pets or plants. Do not leave your floor sanitizer unattended w

HAAN® Corporation assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HAAN® Corporation shall not be liable for incidental or consequential damages in connection with or arising out of the furnishing, performance, or use of this document and the program materials which it descr

Ultra-Microfiber Pads for HAAN® Floor Sanitizing Steam Mop What is an ultra-microfiber? An ultra-microfiber is a textile fiber that is thinner and more absorbent than a microfiber (1.0dtex) pad typically used with steam mops. Specifically, to be defined as an ultra-microfiber, it should be less than 0.2dtex. The Ultra-Microfiber pad by HAAN® Corporation is made of .17dtex ultra-microfibers. How to Use Ultra-Microfiber Pads 1. Please make sure that a completely dry pad is used. 2. As high tempera

HAAN Corporation assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HAAN Corporation shall not be liable for incidental or consequential damages in connection with or arising out of the furnishing, performance, or use of this document and the program materials which it describ

Fig 3 • 50% untreated tap water with 50% distilled or demineralized bottled water 4) Once removed from the main body, turn the Water Reservoir up to show the grey stopper. (Fig 3) 5) Grasp the tab on the stopper and gently pull the stopper out (Fig 4). Remove it only enough to allow for adding water. DO NOT break the connecting elastic band. Fig 4 6) Add water to the reservoir thru the stopper hole until the reservoir is full. Do not overfill. Carefully replace the stopper and close it securely

QUESTION: Does the HAAN® Garment Steamer kill germs? Yes, the 212°F steam kills up to 99.9% of E.Coli, Salmonella and other commmon Household germs – to leave fabrics fresh and clean. QUESTION: Is the GS-30 HAAN® Garment Steamer safe on all fabrics? The GS-30 Professional Sanitizing Garment Steamer can safely and gently steam most fabrics. However, we recommend you test a small seam, hem or hidden area of fabric before you steam an entire garment – especially for delicate or vintage fabrics. QUE

Never use steam head in a horizontal position or tilt into a backward position, this may result in hot water discharge. 10. To reduce the risk of electric shock, do not immerse the appliance in water or other liquids. 11. Appliance should always be turned off before plugging or unplugging. Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. 12. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. 13. Loop cord loose

Turn the grooved tubes on each side of the support to fasten, then hang the steam head between the prongs at the top. • Align the shoulders of the garment on the hanger and allow it to hang freely. • When pressing clothing, temperature, humidity and pressure are important. Because the steam released is of high temperature (212SF). temperature and humidity conditions for easy pressing are sufficient. Since clothing is hung from the support and hangs freety. the pressure on the garment may be w