Para evitar danos reclamaciones hay que tener en cuenta ciertos aspectos tanto en el uso como en su limpieza posterior. Para elucidado de las griferias y las duchas en principio hay que seguir lo siguiente: • Usar solo detergentes previstos especificamente para este campo de aplicacion. • No aplicar detergentes que contengan hipoclorito sodico, acido clorhidrico, formico o acetico porque pueden causar danos importantes. • Detergentes que contienen acido fosforico tampoco pueden ser aplicados ili
Axor Starck Bidet Mixer 10211XX1 Product Features Single-hole mounting Single control with ceramic cartridge Swivel aerator Cascade no-clog aerator Includes pop-up drain Code Compliance This unit meets or exceeds the following: • ASME A112.18.1 • CSA B125.1 • Listed by IAPMO • ADA compliant Available Finishes Chrome Brushed Nickel 10211001 10211821 Installation Notes Not suitable for use on vertical spray bidets 3/8" supply hoses - requires 3/8" compression fittings The measure
Axor Starck Kitchen Faucet 10801001 Product Features Single control operation Solid brass Ceramic cartridge Spout swivels 360° Cascade no-clog aerator 2.2 gpm Code Compliance This unit meets or exceeds the following: • ASME A112.18.1 • CSA B125.1 • Listed by IAPMO • Approved for use in Massachusetts • ADA compliant Available Finishes Chrome 10801001 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Product
flow rate Automatic turnoff 14.5 – 116 psi 120oF – 140oF* 2.2 gpm after 35 sec. Battery Hole size Max. countertop depth Lithium CR-P2/6V 1 3/16” 1 3/4” Installation Considerations • This unit cannot be used with a continuous flow water heater. • Large differences in pressure between the hot and cold water supplies should be balanced. • Do not twist or kink the supply hoses • Flush the supply lines thoroughly before installing this faucet. Debris can clog the filter screens and aerator, causing u
• If adjustment of the temperature is necessary, turn the water off at the supplies (1). Remove the set screw from the rear of the faucet using a 2.5 mm allen wrench (2). • Pull the faucet housing off (1). • Use a slot-head screwdriver to adjust the temperature control screw (2). Turn it clockwise to make the water warmer, counter-clockwise to make the water cooler. • Re-assemble the faucet and turn the water on. Test again. Repeat the process if necessary until the desired temperature is reache
s - requires 3/8" compression fittings The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 3/2008 AXOR'
Axor Montreux 2-Handle Lavatory Faucet 16505XX1 Product Features Traditional cross handles with 90° ceramic cartridges Single hole installation Solid brass Spout swivels 150° Includes pop-up drain 2.2 gpm max. Available Finishes Chrome Brushed Nickel Polished Nickel 16505001 16505821 16505831 Optional Accessories Cap kit set 16911XX0 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Products and specificatio
-up drain 2.2 gpm max. Available Finishes Chrome Brushed Nickel Polished Nickel 16505001 16505821 16505831 Optional Accessories Cap kit set 16911XX0 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 3/2008 AXOR'
Axor Montreux 2-Handle 16506XX1 Lavatory Faucet Product Features Traditional cross handles with 90° ceramic cartridges Single hole installation Solid brass Spout swivels 150° 2.2 gpm max. Available Finishes Chrome Brushed Nickel Polished Nickel Optional Accessories Cap kit set Grid drain 16506001 16506821 16506831 16911XX0 06400XX0 Installation Notes • 3/8" supply hoses - requires 3/8" compression fittings The measurements shown are for reference only. Products and specificatio