This Burley has bowed-out side battens to add elbow room. It also comes with suspension to make the ride even more comfortable. The d’lite features a rear pocket and a fast-action folding system so you can store your Burley quickly and easily. Inside, your kids will be comfy with the deluxe seat pad, padded shoulder harnesses, improved helmet pockets and improved reclining seat. Also included are wheel guards, tinted windows with UV protection, adjustable sun screen, and a 2-in-1™ all-weather co

Roll Bar Installation 1. If handle bar receivers are already installed, loosen and remove handle bar knobs and outer handle bar receivers. Figure 1 2. Using wrench, loosen and remove lock nuts and screws from handle bar receivers. 3. From trailer front, slide roll bar into upper handle bar receivers, with curved front extending above trailer body. 4. Match holes in roll bar and inner handle bar receivers, re-install screws and tighten lock nuts. 5. Replace outer handle bar receivers and tighten

Note: Make sure on/off light switches are accessible. 1. Remove clips and screws from back of lights. 2. Using screws, fasten brackets and lights together. 3. Mount clear light/bracket diagonally on front of roll bar and red light/bracket on rear of roll bar, both on side closest to traffic. Photo 1 Locking Quick Release/ Wheel Installation and Operation 1. With quick release lever in “open” position, insert wheel axle completely into trailer axle receiver. 2. Close quick release lever, with lev

With quick release lever in “open” position, insert wheel axle completely into trailer axle receiver. 2. Close quick release lever, with lever aimed towards rear of trailer. Photo 2 3. Verify that tires are inflated to pressure marked on the tire side wall. 4. To remove wheel from trailer axle, push locking button on side of quick release lever and open lever. Note: The locking quick release lever securely attaches the wheel to the trailer. If you have difficulty removing the wheel, release pres

Figure 2 b. Remove shoulder bolt, lock nut and washer from flex connector in end of tow bar, and disconnect trailer tow bar from hitch. Figure 2 2. Remove bolt, safety strap, lock nut and D-ring/clip from tow bar. 3. Replace old flex connector with new connector, aligning hole in connector with hole in tow bar. 4. From above, re-install bolt through tow bar, safety strap grommet and D-ring/ clip, and securely tighten lock nut. 5. To connect tow bar to Classic Hitch, slide new flex connector betw

950037 Contents: (1) Hitch connector for round tow bar (1) Lock nut (1) Safety strap assembly (1) Bolt (2) D-ring/clip 950038 Contents: (1) Hitch connector for square tow bar (1) Lock nut (1) Safety strap assembly (1) Bolt (2) D-ring/clip For use with Burley standard and forged metal hitches 1. Remove trailer from bicycle. 2. Remove existing bolt, safety strap, lock nut and D-ring/clip from flex connector which is located at the end of tow bar. Figure 1 3. Remove old flex connector from end of t

It is attached to the left rear dropout (the non-chainring side) of your bicycle. 1. Remove the quick release lever assembly from your bike and set it aside. 2. Line up the hole on the flat side of the hitch upper arm with the left rear dropout hole. 3. Reassemble the quick release assembly through the hitch and dropout, but don’t tighten it yet. 4. Slide the hitch receiver end of the tongue between the two hitch side arms, and line up the holes. The hitch should clear any racks, bags, or f

3 Safety Guidelines Pg. 3 Hardware Bag Contents and Tool Lists Pg. 5 Mounting the Reflectors Pg. 6 Attaching the Wheels Pg. 6 Installing the Side Rails (Nomad Only) Pg. 7 Installing the Tailgate and Splashguard (Nomad Only) Pg. 8 Installing the Rollbar and Cover (Nomad Only) Pg. 8 Installing the Tow Bar Pg. 9 Installing the Safety Flag (Nomad Only) Pg. 10 Hitching Your Burley to Your Bicycle Pg. 10 Loading Your Trailer Pg. 11 Safety Checklists Pg. 12 Maintenance and Storage Pg. 13 Parts Lists an

Eugene, OR 97402 : PH 541.687.1644 800.423.8445 FAX 541.687.0436 : tojrleyatojrley.com : i3L-Ji=^L_^b=^ Owner’s Instruction and Safety Manual Baby Snuggler o Stroll Jog babsO snuggler For use while strolling and jogging ONLY. DO NOT USE WHILE CYCLING OR SKIING. Baby Snuggler Installation Instructions For use while strolling and jogging ONLY. DO NOT USE WHILE CYCLING OR SKIING. Recommended age: 3 to 12 months Approximate height: 25"-30" (63-76cm) Weight: 15-21 lbs. (7-1 Okg) NOTE: T

IMPORTANT: Fabric Care Your trailer body is made of a tough, waterproof polyester fabric, which is highly resistant to fading. It can be easily cleaned with any mild soap or detergent and warm water. For heavy soiling, use a nylon bristle brush. Do not use bleach for cleaning, as it will damage the fabric. The fabric is an important part of your trailer’s structure, and provides a protective environment for child passengers. Replace any fabric that is ripped, scuffed, or otherwise damaged. Polye