Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 7.7” (195mm)10.23” (260mm) 7.28” (185mm) 8.60” (218.5mm) 8.05” (204.5mm) 4.25” (108mm) 1.57” (40mm) 7.7” (195mm)10.23” (260mm) 7.28” (185mm) 8.60” (218.5mm) 8.05” (204.5mm) 4.25” (108mm) 1.57” (40mm) 9.13” (232mm) 8.27” (210mm) Design LED 108IP Dimensions The Design LED 108IP (DLED 108IP) by Elation Professional is a high output, compact L.E.D. color changer featuring full RGB color mixing using 36 Luxeon K2 LED’s - 12 RED, 12 BLUE an

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 Design LED 12 Brick Dimensions The Design LED 12 Brick (DLED 12 Brick) by Elation Professional is a high output LED color changer panel equipped with 12 x 1 watt Luxeon LEDs (4 red, 4 green and 4 blue) featuring seamless RGB color mixing and infinite color possibilities. Effects for this unit include macros, 0-100% dimming, strobe effect of 1-18flashes per second and a standard beam angle of 44° with 76 LUX, 7 FC at 3 meters. The desi

For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly. Every person involved with the installation, operation and maintenance of this device has to: -be qualified -follow carefully the instructions of this manual INTRODUCTION: Thank you for having chosen this

A DMX controller sends the DMX data instructions to a fixture allowing the user to control the different aspects of an intelligent light. DMX data is sent out as serial data that travels from fixture to fixture via data “IN” and “OUT” leads located on the fixtures (most controllers will only have output jacks). DMX Linking: To ensure proper DMX data transmission, always use proper DMX cables and a terminator. When using several DMX fixtures try to use the shortest cable path possible. Never spli

23 DESIGN LED 36 Pro™ Channel 6 -General dimming / Program Speed Control This channel has two functions depending on the operating mode. When running the built-in programs this channel will control the program speed, when not running the built-in programs this channel will control master dimming. 0-255 Dimming (0%-100%) ~ Normal Operation 0-255 Speed (min to max) ~ When running built-in programs on channel 4 ©Elation Professional, Los Angeles Ca. 24 DESIGN LED 36 Pro™ ©Elation Professional, Los

- The DMX controller is switched off or defective. - The DMX cable or connector is defective. - A DMX terminator has been inserted into the last fixture in your DMX chain. DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 18 8. FIXTURE MENU On-Board System Menu: The Design LED 36 Pro™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu. LED Control Panel: The control panel located on the base of the fixture allows you

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 6.6” (167.5mm)8.95” (227.5mm) 12.69” (332.5mm) 14.27” (362.5mm) 16.31” (414.5mm) Design LED 36 Tri-Brick Dimensions The Design LED 36 Tri-Brick (DLED 36 Tri-Brick)by Elation Professional is a high output, compact (fits in 12” box truss), LED color changer featuring seamless RGB color mixing using 12 x “Tri-color” 3W LEDs, 36 Watts total - 12 Red, 12 Blue and 12 Green. This unit is convection cooled and provides up to 50,000 hours esti

to 5:00 p.m. Pacific Standard Time. Voice: (323) 582-3322 Fax: (323) 582-3108 E-mail: support@elationlighting.com Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash. Please recycle when ever possible. ©Elation Professional® -- DMX Branc

27 Design Spot 575B™ Design Spot 575B™ the fixture will lock into the last DMX signal it received and remain in that position until it is turned off or begins receiving a new DMX signal. If the fixture is turned on without any DMX signal, the fixture will automatically go in to sound-active mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture will remain at it’s last settings. “Auto Program” – Fixture will go into stand-alone mode, running the built-in program. “Mus

Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE0711-217 for proper installation in Europe To ensure proper installation, only qualified staff should attempt installation. ©Elation Professional® 13 Design Spot 575E™ Design Spot 575E™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture.