Iniciar sesión:
Clasificado: Nombre ↓   Descargas   Tarifa   Tamaño ↑  

Firex 110-1011E

Descargado: 0Tamaño del archivo: 173 kb    Fabricar: Firex  
Categoría: Detector de incendios

It is an important component of your home security system. Please read this booklet thoroughly. The more familiar you are with the information it contains, the easier you will find it to install, operate, and maintain your smoke alarm properly, which ultimately means greater security and peace of mind for you and your family. Invensys Controls Americas The ionization type alarms are generally more effective at detecting fast, flaming fires which consume combustible materials rapidly and spread q

Firex 242

Descargado: 0Tamaño del archivo: 122 kb    Fabricar: Firex  
Categoría: Detector de incendios

With installer-focused innovations such as Quick Connect™ wiring harness, gasketless mounting as well as state-of the-art production testing equipment, FireX smoke alarms have earned their reputation as the most preferred smoke alarms among contractors. The FireX® 242 Hearing Impaired Kit features a FireX 41216 120V AC Smoke Alarm, 499 FireX Relay Module, 240 strobe light (177 candela), and a wiring instruction sheet. The 41216 Smoke Alarm has an 85 decibel horn, test switch, lighted power/alarm

Firex 243

Descargado: 0Tamaño del archivo: 94 kb    Fabricar: Firex  
Categoría: Detector de incendios

Firex 2650-660

Descargado: 0Tamaño del archivo: 108 kb    Fabricar: Firex  
Categoría: Detector de incendios

Duct Smoke Detectors Universal Voltage Models 230 VAC, 115 VAC, 24 VAC or 24 VDC operation 2650-660 Ionization • 2650-661 Photoelectric FIREX® the recognized leader in residential fire protection, brings you the latest in duct smoke detection technology. FIREX® Duct Smoke Detectors provide early detection of smoke and products of combustion present in air moving through an HVAC duct. These devices are designed for prevention of smoke recirculation in areas by the air handling systems. Fans, blow

Firex 2650-661

Descargado: 0Tamaño del archivo: 108 kb    Fabricar: Firex  
Categoría: Detector de incendios

to 68.C) Model 2650-660 -5.F to 120.F (-23. to 48.C) Model 2650-661 Humidity: 10% to 85% R.H. Material: 18 ga. steel backbox, clear plastic ABS-94VO cover Finish: Textured gray finish Maximum net weight: 4.0 pounds Mounting: Template and necessary hardware supplied Dimensions: 9'' H x 7'' W x 2.25'' D (22.9 cm H x 17.8 cm W x 5.7 cm D) Engineers & Architects Specifications Air duct smoke detectors shall be Firex®‚ item number 2650-660 ionization type (2650-661 for photoelectric). The detectors s

Firex 4480

Descargado: 4Tamaño del archivo: 96 kb    Fabricar: Firex  
Categoría: Detector de incendios

The 4480 and 484 AC smoke alarms can be interconnected with Firex ionization as well as photoelectric smoke alarms for the best smoke detection system. 120V AC 120V AC 9V DC Direct Wire Direct Wire Battery with Battery Powered 4480 120V AC Direct Wire with Battery Back-up for single or multiple station use. The 4480 is interconnectable up to 12 Firex AC/DC smoke alarms and 6 Firex heat alarms for a total of not more than 18 Firex devices. This unit has two separate lighted LEDS — green ”poweron”

Firex 45189

Descargado: 1Tamaño del archivo: 472 kb    Fabricar: Firex  
Categoría: Detector de incendios

The alarm shall have a "quick connect" molded harness. The alarm shall have a dual chamber ionization sensor. The alarm shall be rated at no greater than 0.5W in standby. Nominal sensitivity shall be measured by U.L. at 1.29 ± 0.51% obs./ft. Temperature operating range shall be between 40° and 100°F; humidity range between 10%-93% relative humidity; 100% solid state alarm circuits over an input range of 100-130V AC. A green continuous power-on indicator shall be a built-in light emitting diode w

Firex 480

Descargado: 4Tamaño del archivo: 96 kb    Fabricar: Firex  
Categoría: Detector de incendios

Installation of Smoke Alarm This smoke alarm should be installed in accordance with NFPA’s Standard 72 (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269) and any local codes that apply. For the AC and AC/DC direct wire smoke alarms use #18 AWG minimum solid or stranded wire. When interconnecting, maximum wire length between any two is 1,500 feet for #18 AWG or 4,000 feet for #14 AWG (20 OHMS loop resistance). DO NOT connect to any other type or model of heat or smoke ala

Firex 484

Descargado: 1Tamaño del archivo: 96 kb    Fabricar: Firex  
Categoría: Detector de incendios

Nominal sensitivity shall be measured by U.L. at obs. 2.2 ± 1.2%/ft. and by U.L.C. at obs. 2.2 ± .75%/ft. A power-on indicator shall be a built-in LED which blinks once per minute in the standby condition; when activated, the initiating alarm LED shall flash while the interconnected alarms remain extinguished. The 4480 and the 484(C) shall be rated at no more than 0.5W in standby and have 100% solid state alarm circuits over an input range of 100-130V AC. The alarm shall mount to a single gang b

Firex 5700

Descargado: 5Tamaño del archivo: 423 kb    Fabricar: Firex  
Categoría: Detector de incendios

The Firex Heat Alarm, Model 5700, is a fixed temperature unit that detects heat at 135°F (57°C) or greater. It relies on a thermistor that is sensitive only to temperature. When the temperature reaches 135°F (57°C) or greater, the alarm is triggered. The 5700 requires 120V AC power and includes a 9V battery back-up for added protection in the event of a power failure. The 5700 heat alarm is interconnectable with other AC/DC Firex heat alarms, smoke alarms, smoke/co combo alarms, and carbon monox





Categoría