2 – English Symbols SYMBOL EXPLANATION WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. • Use anti-slip and stable boots. • Always wear approved protective gloves. • Only use non-metallic, flexible cutting elements, that is trimmer Always use head with trimmer cord. • A protective helmet whe

4. Make sure the vacuum bag strap is adjusted to allow a free flow of air from the vacuum bag elbow tube (Fig. 19). If the bag is kinked, the tool will not operate properly. WARNING: To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc., because they could get drawn into the air intake. Also make sure long hair does not get drawn into the air intake. Long hair must be pulled back and secured off shoulders and neck. Fig. 19 H

1. With the unit off and unplugged, install the blower tube onto the motor housing. Turn the tube clockwise until it locks (Figs. 1, 2 and 3). ASSEMBLY PARTS BLOWER MODEL-180r ASSEMBLY PARTS BLOWER MODEL-190r BLOWER TUBE REAR HAND GRIP MOTOR HOUSING BLOWER NOZZLE TUBE MOTOR HOUSING 2. Insert the blower nozzle or concentrator tube onto the blower tube and turn it clockwise to lock (Figs. 2, 3 and 4). ASSEMBLY INSTRUCTIONS 2. Align the arrow on the upper vacuum tube with the arrow on the motor hou

Turn the lower vacuum tube clockwise until it snaps into detent and locks. (The dot on the lower tube aligns with the dot on the upper tube when properly assembled.) Lower Vac Tube Rg. 12- INSTALLING THE COMPLETE VACUUM TUBE ASSEMBLY TO THE BLOWER/VACUUM (MODEL 310BVr ONLY) WARNING: Do not install the vacuum tubes while unit is running to avoid serious personal injury. 1. Grasp the assembled vacuum tube firmly with both hands. Turn the tube/adapter clockwise as far as possible to the end of

Consulte los reglamentos pertinentes a esos requisitoscon las autoridades estatales o locales. El incumplimientode esos requisitos puede responsabilizarle o someterle ala imposicion de una multa. Esta unidad fue equipadaen la fabrica con un parachispas. Si requieresustitucion, hay una Pantalla Parachispas disponible, al contactar el departamento de servicio. PROPOSICION 65 DE CALIFORNIA Copie el numero del modelo/ pieza del fabricante aqui: Copie el numero de serie aqui: Antes de arrancar u oper

They should also be included as part of any seasonal tune-up. A WARNING: To prevent serious injury, never do maintenance or repairs with unit running. Always do maintenance and repairs on a cool unit. Disconnect spark plug wire to ensure the unit will not start. FREQUENCY MAINTENANCE REQUIRED REFER TO: Before Starting Engine Fill fuel tank with correct oil and fuel mixture Page 12 Every 10 Hours Clean and re-oil air filter Page 15 Every 25 Hours Check spark arrestor condition and clean Chec

Installing the Vacuum Bag Assembly (Optional for Model 310r) ......................................6 C. Installing the Adapter (Optional for Model 310r) ......................................7 D. Installing the Vacuum Tubes (Optional for Model 310r)....................................7-8 IV. Oil and Fuel Information ............................................9 V. Starting/Stopping Instructions..................................10 VI. Operating Procedures .........................................

NOTE: If additional cleaning of the bag is required, see Cleaning the Vacuum Bag in Maintenance. 4. Zip close and reinstall the vacuum bag. Fig. 15 WARNING: Avoid situations that could catch the vacuum bag on fire. Do not operate near an open flame. Do not vacuum warm ash from fireplaces, barbecue pits, brush piles, etc. Do not vacuum discarded cigars or cigarettes unless the cinders are completely cool. MAINTENANCE AND REPAIR INSTRUCTIONS MAINTENANCE AND REPAIR INSTRUCTIONS NOTE: Some maintenan

Also included may be hoses, belts, connectors and other emission-related assemblies. Where a warrantable condition exists, ROP will repair your small off-road engine at no cost to you including diagnosis, parts and labor. The 1995 and later small off-road engines are warranted for two years. If any emission-related part on your engine is defective, the part will be repaired or replaced by ROP. OWNER'S WARRANTY RESPONSIBILITIES: • As the small off-road engine owner, you are responsible for the pe

BOX 361131 CLEVELAND, OHIO 44136-0019 Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forestcovered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the Cali