When you press the PROGRAM BUTTON (23), all the channel LED’s will flash indicating the scene has been stored into memory. The right two digits in the LCD DISPLAY (6) will advance to the next available step. 6.You may continue this pattern up to 99 times per each CHASE PATTERN. You may mix and match the top and bottom channel buttons together in a CHASE PATTERN, however, remember that the upper and lower channels chase speeds are controlled separately. 7.When you have completed programming all

Never touch lamp ¡with bare fingers as the oil from your lhands will shorten lamp life. Also, never Jmove fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Mxei: Chameleon SPECIFICATIONS: TM Lamp: ZB-EFP 12V 100W Power: 110V/60Hz Optics: High Quality Glass Lens Ventilation: Conventional Wor

Size: 19” x 3.5” x 5” Fuse: 15A SET UP: Link the Flash Tubes to the Flash-2C™ by inserting tube connectors into controller sockets on the back of unit. The maximum length to first Flash Tube™ is 10 ft, any more and you will have to use a Flash Buffer. If you connect more than 30 Flash Tubes in any single line use a Flash Buffer™ to boost signal. At the end of each line connect a Flash-Term™. If you don’t use one the Flash Tubes will work but not properly. Plug Flash-2C™ and any Flash Buffer™

If the microphone is not in use, turn its power switch OFF. When system is not in use, disconnect from power. (2) When battery on the wireless microphone is low, the red BATTERY LOW LED will come ON. Be sure to turn OFF microphone and receiver before changing the battery. WR-80 User Instructions page 2 /Itn&Uazn AUDIO User Instructions Precautions (Cont).: (3) Each time you use the WR-80 microphone system use the following procedure: a. First, turn ON power to the WR-80 receiver. Then, tur

ON, 10 min. OFF Colors: 10 Multiple Colored Lenses HALOGEN LAMP WARNING! "I This fixture is fitted with halogen ( lamps which are highly susceptible | to damage if improperly handled. I Never touch lamp with bare fingers j as the oil from your hands will | shorten lamp life. Also, never move | fixture until lamp has had ample 1 time to cool. Remember, lamps are not covered under warranty | conditions. I Product Discription: The Fan-1000™ features a extremely bright 500W lamp that creates 10

on 10 min. off Fan cooled High quality glass lens Reflective dichoric mirror HALOGEN LAMP WARNING! This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. Operating Instructions: Unit is ready to be hung or set on flat surface. After plugg

on,10 min. off Colors: Multiple Colored Lenses HALOGEN LAMP WARNING! This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. Congratulations and thank you for purchasing the Lotus™ by American DJ®. For your convenience the Lotus™ has been

The Light Copilot is an eight channel controller with two separate chase zones. Each zone is switchable from an audio or a timed chase sequence. Chase intervals vary from 0.1 seconds to 10 minutes. The controller has a built in microphone for easy audio chase sequences. Chases can be made to run to sound via an internal microphone or and external RCA audio line input. Audio chase sensitivity is adjustable by a rotary knob on the front panel. A “Latch” switch can override the chase function, to r

Never touch lamp iwith bare fingers as the oil from your lhands will shorten lamp life. Also, never •move fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Model: Multi-Star™ SPECIFICATIONS: Lamp: 5 x ZB-FCS 24V 150W Dimensions: 21" x 21" x 18.5" Weight: 20 lbs. Supply Voltage: 120V Fuse:

Please read the Owners manual before installing or using your new unit. GALACTIC STAR- WARNING: Never Look Directly INTO Laser Beam CAUTION: Use of controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. 2 3 4,5 6 7 8 9 1. Identification Label 2. Certification Label 3. Mini plug External Power supply 4. Power Switch 5. Shutter Control Switch 6. Emmision Indicator LED 7. Speed Controls 8. Mode Select 9. Reverse - Forward selec