The diagram below illustrates the typical connections that are made for a single-unit XAP 800 system. The default routing settings in the G-Ware Matrix Screen allow the XAP 800 to work out of the box for this type of installation. CHAPTER 2: Installation Hardware Setup Figure 2.1. XAP 800 installation diagram 1100 Installation ~ Hardware Setup Figure 2.2. XAP 800 rear-panel connectors To connect the unit 1. Place the unit in a standard 19-inch rack and attach it securely. 2. If you are using a c

.. relative gain adjustments. Argument details Name Description Units Device 0–7 or * to select all units MAX Command form Channel See Groups and Channels, page 97 Group I,O,M,P,L Value -65.00 to 20.00 dB Null to return the current setting Example: #51 MAX 2 M 10 On XAP 800 unit 1 (#51), the maximum (MAX) relative gain setting for mic (M) channel 2 is 10dB. Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands MDMODE - Modem Mode This command e

MAX phones are offered in analog wired, analog wireless, and SIP-based versions, and deliver unprecedented expansion capabilities. Instead of providing only expansion microphones, MAXAttach offers multiple linked phones, each with microphones, loudspeakers, and dial pad controls for outstanding full-room coverage. No matter where participants are seated, conversations are natural and effortless. A single MAX phone is typically used in small- to medium-sized conference rooms, executive offices, a

Figure 3.22. Line input device list 2. Click the plus sign ( +) to expand the category that matches your device type. 3. Click the device name and drag it to the Configuration screen. Drop over the Line Input or Output. The label and icon will change based on the selected device. Note: Video codecs will cover both Line Input and Output. A sound card should be placed on Line Input or on both Input and Output for web conferencing. An amplifier is Output only. Technical Services Group ~ 1-800-283-5

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this d

No part of this document may be reproduced in any form or by any means without written permission from ClearOne Communications, Inc. Printed in the United States of America. ClearOne Communications, Inc. reserves specific privileges. Information in this document is subject to change without notice. PSR1212 Installation and Operation Manual ClearOne Part No. 800-155001 Jan 2007(Rev. 7.1) Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 PSR1212 Installation and Operation Manual iii

5. Press the dir button to return to STANDBY mode. Deleting Caller ID Records When viewing the Caller ID information you can delete a single call record or all of the call records. Deleting a Single Record 1. Press the SCROLL UP or DOWN button to find the record you wish to delete. 2. Press the del/chan button. The LCD Screen will display “ERASE ITEM?” 3. To delete the record, press the del/chan button. The LCD screen will show “ERASED.” 4. Press the dir button to exit the Caller ID list. Deleti

~ 5225 Wiley Post Way, Salt Lake City, UT 84116 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107 Printed in China. (Stamp comment KP andrew 27.04.2007 0:47:54 blank) Table of Contents Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . Service and support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Product returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Important safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I understand that only by destroying the equipment am I qualified to receive discounts towards the purchase of eligible products. I understand that I must either send the product back to ClearOne as proof of destruction OR include a photo of the destroyed product with product’s serial number clearly visible. Customer Signature Date SoundStation™Model Serial Number Submit the MAX Trade Up Claim Form, Certificate of Destruction, a copy of an invoice showing the purchase

Other product names may be registered trademarks of the respective owners who do not necessarily endorse ClearOne or ClearOne products. Conference Phone Trade up ClearOne Please complete the following: Date:_ *Contact Name:_ *Company Name:_ * Address:_ •jU __ City, State, Zip:_ *Phone:_ Fax:_ *Email: _ (*) required fields ClearOne MAX® TRADE UP CERTIFICATION OF DESTRUCTION In order to show adequate proof of destruction of equipment, you must submit photo(s) of the destroyed produc