1.4 Allocation of the drive letter to the Freecom drive (PC) After successfully completing the installation of the Freecom drive a new drive letter is assigned automatically. This can shift the drive letter of an internal drive (for example, 'D' to 'E'). If this leads to problems, it is possible to change the drive letter assignment as follows: 1. Click on the „Start“/“Windows“ button. 2. Right-click on „Computer“ and select „Manage“ – „Disk Management“. 3. Right-click on the drive whose drive l

DVD recording is not reliable through USB 1.1. 4 General information General information Media standards • BD-ROM, BD-RE, BD-R, DVD-ROM, DVD±R, DVD±RW, DVD-RAM, CD-ROM, CD-ROM XA, CD-I, Photo-CD, Video CD, CD-Extra, CD-Text, CD-R, CD-RW Precautionary Measures and General Notes EN • After transport, particularly at low outside temperatures, condensation can form which can lead to a malfunctioning. For that reason, you should not begin operation until the drive and CDs/DVDs/BDs have reached room t

5. How To Make A Skype Call 1. Press "Skype" button to make Skype window active. 17 Freecom Internet Phone Freecom Internet Phone 2. Skype has Contacts as the default tab. GB 5 3. Toggle the Buddy Seesaw up and down to select your contact, then press Accept/Dial button to make a call. 18 How to use Freecom Internet Phone How to use Freecom Internet Phone 4. Skype starts dialing, a new tab page will display the status of the call placed. GB 5 5. When the other party answers the call, a Call Durin

• Never place air conditioner near flammable materials. • Never put heavy objects on the unit. • To avoid damage and maintain proper operation, place indoor unit a minimum of 30 inches from curtains, furniture, blankets, loose material, or any other obstructions. Keep the unit a safe distance from stairs. • DO NOT use or operate the product in a confined space, such as a closet. • To avoid water leakage and damage: • Always operate the product on a solid, level surface. • Before moving the unit,

Ceci pourrait endommager le circuit de controle (dommage exclu de la gantie). Utilisez toujours le bouton "ON/OFF" du tableau de commande. • Ne pas glisser le cordon d'alimentation sous la moquette ou des tapis. • Ne pas recouvrir l'appareil avec des vetements, serviettes ou objets similaires. • Ne pas obstruer l'entree ou la sortie d'air, ni bloquer les deflecteurs oscillants. • Ne pas debrancher l'appareil si vos mains sont humides : ilyarisque de choc electrique. • Ne pas placer d'objets sur

The default temperature is 77.F. Press right button to lower cooling setting; press left button to raise cooling setting. Each press of the button will adjust the temperature approximately 1.F. The temperature setting can be adjusted from 68.F to 86.F. CAUTION: To avoid injury or damage and voiding the warranty, DO NOT manually adjust the louvers. 5. Press “AUTO SWING” button on control panel to begin oscillating horizontal louvers. The louvers will move slowly up and down for optimum air distri

Place unit in its upright position for a minimum of three hours before operating for the first time. 1. 2. 3. 4. Place unit on a solid, level surface. Operating this unit on uneven or soft surfaces may cause vibration, noise, and possible water leakage from the condensate tank. Place unit at least 20" from any walls, draperies, or other obstructions. Carefully push the unit on its caster wheels to desired location. CAUTION: Do not operate unit without condensate water tank and air filters proper

0A9471 (Revised 11/97) TABLE OF CONTENTS Owner's Record ............................................................................................................2 Features ........................................................................................................................3 Accessories ..................................................................................................................3 Important Safety Information ..............................................

Push right side of connector flange into right side of vent opening. Adjust connector flange slightly so it is square in the opening. The foam gaskets will rest between the connector and the edge of the vent opening. 5. Push nozzle onto small connector end of vent duct pipe. 6. Place nozzle out an open window or through an exterior wall. Contact an experienced contractor or qualified craftsman to modify wall or windows, if necessary. To use the Exhaust Duct Kit with other Freecom accessories, fo

Il doit etre utilise en position verticale. Si pour une raison quelconque vous deviez le coucher sur le cote, ne le remettez en route que deux heures environ apres l'avoir replace en position verticale. Ceci permettra le repositionnement correct des liquides et gaz du systeme refrigerant. INSTRUCTIONS DE SECURITE A lire attentivement avant utilisation Securite • Ne pas arreter l'appareil en debranchant la prise de courant en cours de fonctionnement. Ceci pourrait endommager le circuit de control