APPLICABLE SERIAL NUMBERS : 90400101 and up US-1 EBZ5100Q SAFETY FIRST Instructions contained in warnings within this manual and warning seals marked with a symbol on the blower concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. Note that there may be times when warning seals peel off or become soiled and impossible to read. If this ha

ES-3 TR2350S 3. Etiqueta de advertencia en la maquina (1) (2) (3) (4) (5) (6) 15m (50ft) (1) Lea el manual de instrucciones antes de usar esta maquina. (2) Use proteccion para la cabeza, ojos y oidos. (3) .Advertencia! Advertencia sobre el peligro de sacudida. (4) Tenga cuidado con objetos que se disparan y rebotes. (5) Advertencia/Atencion (6) Mantenga a ninos, espectadores y ayudantes a una distancia de 15 metros del desbrozador. IMPORTANTE Si las etiquetas de advertencia se desprenden o se ma

De lo contrario, el combustible podra derramarse del tanque durante el transporte. 18 6. Set up English ¦ CONNECTING SWITCH WIRES • Connect the switch wires between the engine and the main unit. Pair the wires of the same color. ¦ INSTALLING HANDLE • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1) (1) About 11 inches (28cm) ¦ INSTALLING DEBRIS GUARD • Put the debris guard on the gear box, attach it with the screws and hardware provided. (SE2) ¦ INS

7. Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly. ¦ Disposal When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. US-8 HEZ2450S/HEZ3050S 6. Set up (B) (A) SE1 SE2 ¦ MOUNTING OTHER PARTS 1. Insert the driveshaft into the clutch drum, then attach the gearbox to the shaft tube as aligning the p

For safe operation starts. Make sure the throttle is at idle position. Never place the throttle into the high speed position or half throttle position (throttle lock position) when starting the engine. 3. After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original position (idle position). If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your aut

¦ BEFORE STARTING THE ENGINE 1. The area within a perimeter of 50 feet (15m) of the person using the product should be considered a hazardous area into which no one should enter. If necessary yellow warning rope, warning signs should be placed around the perimeter of the area. When work is to be performed simultaneously by two or more persons, care should also be taken to constantly look around or otherwise check for the presence and locations of other people working so as to maintain a distance

Inspect the filter periodically and, when dirty, clean the element by washing in gasoline. Dry the filter element completely before installing it in place. D. Spark Plug Inspect the spark plug frequently especially if difficult starting or miss-firing is experienced. Pull the spark plug cap out and remove the plug using the socket wrench attached to the unit. Clean the electrodes and reset spark gap to .24 " . For replacement plug, use a Champion RCJ8 or NGK BMR6A. E. Spark Arrester Lack o

n WORKING PLAN 1. You should never use the product when under the influence of alcohol, when suffering from exhaustion or lack of sleep, when suffering from drowsiness as a result of having taken cold medicine or at any other time when a possibility exists that your judgment might be impaired or that you might not be able to operate the product properly and in a safe manner. 2. When planning your work schedule, allow plenty of time to rest. Limit the amount of time over which the product is to b

1. When restarting the engine immediately after stopping it, leave the choke open. 2. Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it. ¦ STOPPING ENGINE (OP4) 1. Release the throttle lever and run the engine for a half minute. 2. Shift the ignition switch to the “Stop” position. (OP4) • Except for an emergency, avoid stopping the engine while p

APPLICABLE SERIAL NUMBERS : 90200101 and up US-1 PSZ2450S SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. ¦ WARNINGS IN THE MANUAL WARNING This mark indicates instructions which must be followed in order to prevent accidents which could lead to s