Overview – Technical Description 3 2. Installation and Set-up 3 3. i-Point ACU Controller Installation 4 4. Maintenance 6 5. Spares and Replacement Parts 6 6. Manual Over Ride 7 7. Overall Dimensions 8 8. Mounting Bracket Positions 9 1. Overview – Technical Description The ENTERPRISE120 is an azimuth over elevation positioning mount with motorised polarisation control. All axis feature simple and very robust 24V DC motor drives giving reliable, low backlash, high and low speed motion controlled

The unit offers superior tracking integrity with any C- Band antenna up to 9.6 meters and any Ku- Band antenna up to 4.5 meters. The control unit uses the INTRAC (INtelligent TRacking Antenna Control) algorithm which has been developed and refined over a 20 year period. It offers exceptional immunity to propagation disturbances and fades, maintaining reliable pointing accuracy even at low angles of elevation in regions of high scintillation. The INTRAC 205 is compatible with INTELSAT and EUTELS

Please follow the steps below to install the module on your system. Step 1: Touch the metal part on the surface of your computer to neutralize the static electricity that might be in your body. Step 2: Plug your USB module into the selected USB port. Hold the module only by its edges Plug the module firmly into place. Use of excessive force must be avoided; otherwise the module might get damaged. Note: In case you installed the module without installing the DLL driver first, Windows 2000/XP will

The time limitation (seconds) is from 1 ~ 4095 46 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual 3.2.5 Security Configuration Figure 3-9 Security configuration Only configure the authorized IP This option is enabled in order to protect all configuration settings from being changed inadvertently. Allow any IP to access If this option is enabled, any PC can access data from this ADAM-4570/ADAM-4571/EDG-4504. The specified IP which can access If you do not want many PCs to have the access right, you ca

For the external test, you will need to connect each port to a loopback tester. The test 4 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual is divided into two parts: Signal test and Communication Parameters test. If the results are OK, users can be sure the communication quality between host PC and ADAM-4570/ 4571 is OK. Easy to maintain by downloading firmware remotely Advantech continually upgrades ADAM-4570/ADAM-4571/ EDG-4504’s firmware to keep pace with the ever-expanding world of computing. You

Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd., assumes no responsibility for its use, nor for any infri

You may open the CD-ROM drive door by pushing the eject button located on the door of the drive. When the door opens, you can pull the tray out completely and clip in the CD onto the tray face up; then push the door in completely. The light on the CD door will light up while the CD-RPOM is being accessed. 2.3.8 Slim FDD Drive A floppy disk drive is essential as the floppy disk is still an important medium for transferring data between systems. Floppy disks are available in all computer stores an

5-58 ADAM 4000 Series User’s Manual 4011, 4011D, 4012 Chapter 5 @AARE Name Read Event Counter command Description The addressed module is instructed to return its event counter value. Syntax @AARE(cr) @ is a delimiter character. AA (range 00-FF) represents the 2-character hexadecimal address of an analog input module. RE is the Reads Event Counter command. (cr) represents terminating character, carriage return (0Dh). Response !AA(data)(cr) if the command was valid. There is no response if the mo

You can create a maximum of eight arrays from the BIOS. See “Understanding Arrays” if you have not yet decided what type of arrays you need. DNS-3200 User’s Manual 54 Notes: 1. In some circumstances, more than eight arrays are possible and may appear to function properly, but are not supported by Broadcom. 2. For redundant arrays, the creation process does not complete until after the operating system and controller drivers have been installed and you have booted into the operating system contex