Frame Parts x 6 pcs (4 top/bottom frame pcs. + 2 side frame pcs) 2. Tension Rods x 6 pcs (4 top/bottom rods + 2 side rods) 3. Screen Material x 1 pc 4. Center joints x 2 pcs 5. Elbow Joints x 4 pcs 6. Wall brackets x 2 – 3 pcs (depending on model/size) 7. Screws x 16 pcs 8. User Guide x 1 pc 9. Center Support Bar x 1 – 2 pc s (depending on model/size) 10. Support joiner x 2 – 4 pcs (depending on model/size) 11. Fix Plates x 30 – 90 pcs (depending on model/size) 12. Black cloth backing x 1 pc (Ac

a.b. c. Parts List QTY a. Insta-RP Screen Material 1 b. Microfiber cleaning cloth 1 c. Scraper 1 Caution Notes: 1. This product is an adhesive rear.projection screen that can be applied to various surfaces such as transparent glass or acrylic. 2. This product is made for one.time permanent application. It has a non.reusable adhesive film that bonds firmly to a window surface. If the surface has any layer treatment such as tinting, it is likely that the layering will be damaged upon removal of th

Please make sure that no other objects such as power switches, outlets, furniture, ladders, windows, etc. occupy the space designated to hang the screen. 2. Regardless if the screen is installed inside or on the wall, make sure that the proper mounting anchors are used and that the weight is supported appropriately by a strong and structurally sound surface just as any large and heavy picture frame should. (Please consult a home improvement specialist for the best advice on installation.) 3. Fra

062310-JA info@elitescreens.com Kestrel Accessories Kestrel Accessories Qty 1 Radio Frequency Remote Control Qty 1 Infrared Remote Control Qty 2 AAA batteries Qty 1 Qty 1 Qty 1 5-12V Trigger Low Voltage 3-way IR “eye” Receiver Wall Switch IMPORTANT SAFETY NOTES 1. Please read this manual before use and follow the procedures specified: a. Please retain this manual for future reference. b. To avoid any damages to the screen, do not use any accessories or parts not recommended by Elite Screens. c.

Please follow the pre-cautions below for proper care procedures and to prolong the life of your StarBright7. Failure to comply will result in voiding your warranty. Avoid using any chemical compounds or harsh abrasives which will result in permanently damaging the screen material. • USE ONLY a soft non-abrasive cloth with mild soap and water to clean the screen material • DO NOT rub the cloth with force when cleaning to avoid permanently scratching the surface • DO NOT touch the screen surface w

1. Frame Parts x 6 pcs (4 Top & Bottom frame pcs + 2 Side frame pcs) 2. Tension Rods x 6 pcs (4 Top & Bottom frame rods + 2 Side rods) 3. Screen Material x 1 pc 4. Center Joints x 2 pcs 5. Elbow Joints x 4 pcs 6. Wall Brackets x 2.3 pcs (depending on size) 7. Screws x 16 pcs 8. User Guide x 1 pc 9. Center Support Bar x 1.2 pcs (depending on size) 10. Support Joiner x 2.4 pcs (depending on size) 11. Fix Plates x 30.90 pcs (depending on size) 12. Black Cloth Backing x 1 pc (AcousticPro 1080 models

It can be adjusted in both length and height to optimize the right level of projection. SPECIFICATIONS Max weight for ceiling and wall installation. 37.4 lbs. Total weight of the A56.E25B2. 3 lbs. Overall dimensions of the A56.E25B2. (L x W x H) 12.5” x 4.3” x 2.3” ExampleofA56. E25B2asashort. throwmountforwallinstallation. ExampleofA56.E25B2withoutextensionbarforaflushmounttotheceiling. ExampleoftheA56.E25B2withextensionbarforhighorangledceilings. Rev.030111.AS info@elitescreens.com 2 Flush Cei

060809-JA info@elitescreens.com Tripod Screen Parts Identification Tripod Screen Parts Identification Top Hook, Keystone Eliminator & Screen Handle Support beam Vertical Extension Bar Screen Material Screen case Carrying handle & Screen height adjustment lock/release tab Tripod junction Tripod Support Legs End cap Vertical locking sleeve ring Using the Screen A. Setting up the screen: Follow the steps below and Fig. 1 & 2. 1. Place the screen in an upright position (fig.1) with the legs toward t

Elite Screens In-Wall Switch Module ( ZIW-Module ) m W Gray (Up) Ethernet (RJ45) network cable Blue(Down) Local wall switch Yellow(Common) Elite in-wall UP/DOWN switch module (ZIW-Module) Elite Electric/Motorized Screen Steps to attach Elite Screens Motorized Screen to your local wall switch 1. Attach Elite Screens in-wall switch module (Part #: ZIW-Module) to your local wall switch as shown in diagram above 2. Attach an RJ-45 Ethernet cable (not included) to the ZIW-Module and the ot

Bracket Hook Black Masking Border Edge Small support rod Locking sleeve White projection surface Lock Bottom Black Masking Big support rod Box Cover Note: Middle foot available on 120” models and above only. Box Foot Base Back Base anchor (available on models 120” and above only) Adjustable up to 1” Adjustment screw for leveling Attention: -Please install the two telescoping support rods simultaneously when pulling up and retracting the screen material. -Do not use the screen in a very strong wi