From basic to fully modular systems,the Tarsys Series features advanced technology to provide the functionality and versatility you have come to expect from Invacare products. Basic Powered Seating: Products designed for consumers whose seating needs can be satisfied with a basic tilt system. These individuals are not expected to have the future requirement of power recline, powered elevating legrests, or a ventilator tray. • The Invacare Tarsys Power Tilt Only (PTO) system provides a simple,ele
Tilt-in-Space Wheelchair nvacare took the best the Solara™ had to offer and built it into a size that’s perfect for pediatric consumers. The Solara™ jr. is special because it keeps the consumer’s center of gravity almost perfectly stationary throughout the entire 50° tilt range.This gives the Solara jr. a compact wheelbase while maintaining excellent stability, providing comfort and security for the pediatric consumer. And it can help decrease startle reflex, since the consumer is tilted into t
INSTALLATION WARNING After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely. . . . ! " # $ . SAVE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the Dealer/Carrier for further instructions. SAFETY SUMMARY The following recommendations are made for safe installation of the Solid Seat. GENERAL WARNINGS ADULT/HEMI REMOVABLE ARM WHEELC
Contact Carrier/ Dealer for further instruction. SAFETY SUMMARY The following recommendations are made for safe installation and adjustment of the Patient Operated Wheel Locks: 3. Remove the existing tube clamp from the wheelchair frame. 4. Install the plug button into end of the NEW pivot arm assembly. 5. Insert the NEW strap and stud assembly through the pivot arm assembly and secure with locknut. 6. Install the NEW tube clamp over the frame and DO NOT install or use this kit without first rea
1300, 1035965, and 1035966 NOTE: Check all parts for shipping damage and test before using. In case of damage, DO NOT use. Contact the dealer/Invacare for further instructions. SAFETY SUMMARY The following recommendations are made for the safe installation of the Wheelchair Tray: WARNING DO NOT assemble or use this equipment without first reading and understanding this instruction sheet. If you are unable to understand the Warnings, Cautions or Instructions, contact a healthcare professiona
84-41 P/N 1023704 Rev. B (1) - 11/99
Left Outside Armrest Bracket Left Inside Armrest Bracket Left Armrest Spacer Right Outside Armrest Bracket Right Inside Armrest Bracket Right Armrest Spacer Front Armrest Socket Rear Armrest Socket Tube Supports Hex Screw Locknuts 1 1 1 1 1 1 2 2 2 8 8 socket (FIGURE 2). 6. Loosely secure the brackets, armrest socket and armrest spacer together using one (1) of the six (6) hex screws and a locknut. 7. Position the armrest bracket on the rear frame making sure that the armrest spacer is positione
4. Install the armrest socket into the armrest bracket. NOTE: Mounting hardware must be installed in the oreintation shown in FIGURE 5. 5. Install long hex screw through armrest socket, tube support, coved armrest spacer, washer, armrest bracket, spacer and armrest bracket as shown in DETAIL “A”. NOTE: Ensure armrest socket is flush in coved spacer. 6. Secure with locknut. DETAIL “A” - TOP VIEW LEFT RIGHT Wheelchair FrameTube Support Armrest Socket Hex Screw Armrest Bracket Spacer Coved Armrest
to 2.inches, call Invacare Technical Support at the number listed on the back page. •Adjustable Height Anti.Tipper Assemblies: If the distance between the bottom of anti.tipper wheelsand theground/floorisnot1. to2.inches,adjustanti.tippers. Refer to Adjusting Anti.Tippers on page 3. Spring Button(s) (STEP 5) *Anti-Tipper(if provided) (STEP 4) Frame TubeLower Locking Hole (9/32-inch Diameter) *NOTE: Non.adjustable Anti-Rattle (STEPS 2,3) anti.tipper shown. 15/16-inch (STEP 3) Plug Button or End C
Anti-tippers MUST be used at all times. When outdoors on wet, soft ground or on gravel surfaces, anti-tippers may not provide the same level of protection against tipover. Extra caution must be observed when traversing such surfaces. Ensure the anti-tipper wheels are pointing towards the ground/floor BEFORE operating the wheelchair. After ANY adjustments, repair or service and BEFORE use, make sure that all attaching component parts are secure. Installing Anti-Tippers NOTE: For this procedure, r