No further manual setting is necessary. SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME Example: Daylight saving time starts on Sunday, March 25, 2001. Year DateMonth D.S.T. START SELECT CHANGE SET SELECT D.S.T. START CHANGE SET SELECT D.S.T. START CHANGE SET 16 SELECT D.S.T. START CHANGE SET Step 1 Press the SELECT button and position the " " mark at the "D.S.T. START". At that moment, the "Year" flashes. (The flashing means it can be changed.) Change the "Year". In case of the example, press

All rights reserved. Contents Here’s all the information you need for setting and operating your new Lathem time recorder. Service information is also included in this manual, in case any problems ever arise. Thank you for choosing a Lathem time recorder. Should you ever need assistance, please let us know. Ordering Accessories ................................................ 2 Setting the Time ........................................................ 3 Changing the Ribbon........................

END SELECT CHANGE SET D.S.T. END SELECT CHANGE SET D.S.T. END SELECT CHANGE SET 22 20 DELETING THE DAYLIGHT SAVING TIME SETTING Press the SELECT button and position the " " mark at the "D.S.T. START". At that moment, the "Year" flashes. (The flashing means it can be changed.) Next, press the SET button. At that moment, the flashing changes from "Year" to "Month". Step 1 D.S.T. START SELECT CHANGE SET D.S.T. START Press the CHANGE button to set at " ". And then press the SET button. At that momen

(This is the zero minute.) 2. Set the Hour Wheel Figure 4.2 to the current Hour. 3. Rotate the Clock Face Setting Wheel Figure 4.3 to set the hands to match the time set on the wheels. 4. Rotate the Main Setting Wheel to advance both the Clock Face and Print Wheels together. Rotate until you pass the actual time by one minute (each “click” indicates one minute.) For example, at 10:05, rotate 5 times = 5 clicks = 5 minutes past ten o’clock. 5. Hold the corner of the Clock Face and release the Rel

Shouldyou ever need assistance, please let us know. This guide contains all the information you need for setting up and operating your new time recorder. Service information isalso included for replacing certain parts. OrderingAccessories .............................................1 Start Here..........................................................2 1. Mount Clock in Suitable Location ...........................2 2. Unlock and Remove the Cover...............................2 3. Liftthe Type

Service information is also included in this manual, in case any problems ever arise. Thank you for choosing a Lathem time recorder. Should you ever need assistance, please let us know. Ordering Accessories ........................................................1 Setting the Time................................................................2 Changing the Ribbon.........................................................9 Replacing the Type Section...........................................10 Ins

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the us

17:30 • Up to 48 programs can be set (Program No. 1 through No. 48). 1 Press the [SELECT] button and position the " " over the "TIME TABLE PROGRAM" mark. At that moment, the flashing digit indicates the "Program No.". (The flashing means it can be changed.) 2 Setting program No. 1 (1) Set the "Day of the week". Press the [SET] button. At that moment, the flashing changes from the "Program No." to the "Day of the week". In case of example, press the [CHANGE] button to set at "9". And then press t

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interf

4 In the example, push the SET button because the month of October is not to be changed. Now October has been set. At that moment, the flashing of the display will change from "Month" to "Date". 5 Change "Date" (for example, from 20 to 21) Push the CHANGE button to set "Date" at "21" and then push the SET button, and now the date of 21 has been set. At that moment, "Date" on the display will change from flashing to steady, and the date change setting is now completed. DATE DATE DATE DATE CHANGE