Do not put a heavy object on the time recorder, or forcefullypress the time recorder onto the back-plate. This may cause trouble with the punching mechanism. Lithium battery contains perchlorate material – special handling may apply. Please go to the web site for information about proper methods of disposal. About this Manual This manual will guide you through the installation, set up and use of your 800P TruAlign Time Recorder. Optional Accessories . E8-100 Weekly timecard for the 800P (pack of

OMSC-0708 Copyright © 2008 Lathem Time Corporation. All rights reserved. TABLE OF CONTENTS SPECIFICATIONS..................................................... 1 INTRODUCTION ....................................................... 2 QUICK START STEPS.............................................. 3 DIP SWITCH SETTINGS........................................... 8 PROGRAMMING A SECURITYCODE.....................9 UNLOCKING THE KEYPAD.................................... 10 SETTING TIME AND DATE ......

Ports: RS-232 cable at speeds of 1200, 2400, 4800 and 9600 For PC100-R: RS-485 Cat. 3 or Cat. 5 cable (suggested) of 2400, 4800 and 9600 baud. Up to 4000 feet Certifications: UL; C-UL; FCC Part-15 Class-B; Canada ICES-003 Class-B; CE-CENELEC EN55022; CENELEC 9 PC100 Terminal User’s Guide APPENDIX A Cable Wiring Diagrams RS-232 (Computer to PC100) 10 PC100 Terminal User’s Guide RS-485 Multi-Drop PayClock PayClock PayClock See Fig. A Be sure to maintain polarity through out the chain Fig. A – Junc

You must see your network administrator prior to beginning the installation for this information. Mount the Terminal The PC3500TX is designed to operate indoors. You should use the terminal where the temperature is between 32°-110° F and humidity is less than 95%. You should choose a place where the terminal cannot vibrate. Exposure to outdoor conditions such as rain or snow voids the warranty and can damage the terminal. 4 - PC3500TX Terminal Installation & User’s Guide To install the mounting

2. This warranty does not apply to any product which has been subject to abuse, neglect, or accident, or which has had the serial number altered or removed, or which has been connected, installed, adjusted, or repaired other than in accordance with instructions furnished by Lathem. 3. This warranty does not cover dealer labor cost for removing and reinstalling the machine for repair, or any expendable parts that are readily replaced due to normal use. 4. The sole responsibility of Lathem under t

Turn the PayClock so its back faces you 2. Plug the power cord (AC adapter) into the PayClock, keeping the cord slack 3. Plug the other end of the power cord into a wall outlet 4. Connect the jack end of the serial cable to the PC100 5. Connect the other end of the serial cable to an open COM port on your computer. All serial ports are raised pin (male) connectors Connecting Terminals via RS-485 When selecting your installation method, the type of wire that will be used is important. Silver Sati

No warranties are given with respect to products purchased other than from Lathem or an authorized Lathem reseller and any such products are purchased "as is, with all faults." In no event will Lathem be liable for any direct, indirect, special, incidental or consequential damages arising out of or in connection with the delivery, use or inability to use, or performance of this product. In the event any limited remedy given herein shall be deemed to have failed of its essential purpose, Lathem's

.......................... 9 Cable Wiring Diagrams 10 RS-232 (Computer to PC100) ..................................................................................................... .......... 10 RS-485 Multi-Drop.............................................................................................................. .................. 11 Junction Box to Terminal ....................................................................................................... ............... 12 Troub

See the Cable Wiring Diagrams for detailed connection points For more details or how to supply see the SWIFT-485+ User’s 6 PC100 Terminal User’s Guide CHAPTER 4 Using the PC100 The base model PC100 clock allows only an RS-232 connection. The PC100-R model allows RS-232 or RS-485 connections; RS-485 connections require the Terminal Manager software add-on. The PC100 has a magnetic stripe badge reader. The magnetic stripe should be on the left side of the badge when swiping. To swipe the badge, in

Other product names mentioned in this manual may be trademarks of their respective companies and are hereby acknowledged. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE: This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful