THR'D. 1-1/2” O.D. Mfl -;—2-3/8”' T~4” (10.2cm) / (6cm) 2-3/4” (7cm) 24” (61cm) 32” (81.3cm) WOOD BASE/CERAMIC FLOOR RAIL 51-3/8” (130.5cm) WOOD BASE/CERAMIC FLOOR RAIL Kohler Co., Kohler WI U.S.A. 2 110050-2-AB 3. PRODUCT REQUIREMENTS A. SUMMARY OF KEY REQUIREMENTS B. PRODUCT INSPECTION • Observe all local plumbing and building codes. • Install the unit level with the subfloor. • Provide properly-dimensioned framing. Carefully unpack the whirlpool, remove the protective tape, and

Be careful not to scratch the surface of the product. 7. INSTALL THE WOOD RIM NOTICE: The wood rim must be installed to the bath before any framing is built around the bath. Do not use this wood rim in sunken installations. Install the bath, and make the drain connections. Use two people for this procedure. Hold the wood rim in position under the bath rim. Install the angle brackets to the wood rim, as illustrated, using #10 x 3/4” round-head screws. The holes are pre-drilled in the wood rim.

ORDERING INFORMATION B. PRODUCT INFORMATION Accessories/hardware: Drain for drop-in K-7158 recommended Drain for free-standing K-7159 recommended Adjustable legs K-1172 optional Fixture*: basin area top area weight Bathing well 44” (111.8cm) x 24” (61cm) 60” (152.4cm) x 32” (81.3cm) 485 lbs. (220kg) water depth capacity Overflow 15” (38.1cm) 82 gals. (310L) * Approximate measurements for comparison only. Included Components: Cutout template 106594-7 C. INSTALLATION NOTE

Framing is of 2x4 construction. Make sure you allow for access to the pump in the event the unit requires service. When constructing the framing, allow for the thickness of sub and finished wall materials. If an apron wall without a ledge is desired, the finished apron wall surface must be 1/16” (2mm) under the bath rim. The whirlpool can be installed in a corner. Recess or sunken installations are also possible. Steps 1. through 3. below illustrate suggested stud construction. Modifications m

Having done so, keep it handy for future reference. The Mira Azora is a thermostatic electric shower with separate controls for power selection and temperature/flow adjustment. A unique thermostatic valve stabilizes temperature changes caused by water pressure fluctuations. These can result from taps being turned on or off, or a toilet being flushed. An individual light indicates “ON/OFF”. The Mira Azora comes complete with a set of Mira Energise Shower Fittings. Mira Azora 9.8 kW A 9.8 kW 240 V

KOHLER TELLIEUR® Features • Select hard maple, both solids and veneers • 4 unique door inserts • Modular system allows creativity and flexibility with design layout • Fashionable yet functional bathroom storage • 14" (35.6 cm) x 12 1/2' (31.8 cm) x 31" (78.7 cm) (K-3107) • 14" (35.6 cm) x 12 1/2' (31.8 cm) x 14" (35.6 cm) (K-3108) Codes/Standards Applicable Specified model meets or exceeds the following: • None applicable STORAGE CASES K-3107 ALSO K-3108 Colors/Finishes • F2: Bl

The storage cases shall be made of select hard maple, both solids and veneers. The storage cases shall have 4 unique door inserts allowing creativity and flexibility with design layout. The storage cases shall be Kohler Model K-_-_-_. Page 1 of 2 086216-4-AC USA: 1-800-4-KOHLER Canada: 1-800-964-5590 kohler.com TELLIEUR® Installation Notes Install this product according to the installation guide. Optional Top 12-1/2" (31.8 cm) 14" (35.6 cm) 4-5/8" (11.7 cm) 2-3/8" (6 cm) 3-1/8" (7.9 c

And, with CleanCoat™ technology, keeping your bath or shower door clean and beautiful for years to come couldn’t be easier. SERIES NUMBER SERIES NUMBERSERIES NUMBER BATH & SHOWER BY-PASS DOORS PIVOT/HINGE SHOWER DOORS CleanCoat ™ Technology A special glass treatment that creates a barrier between the water and glass to help keep your shower door looking new. Standard on all frameless doors. 6065/6075 5300 5400 5100 5900 600 2 Towel Bars (in/ outside) Yes Yes Yes 1 Towel Bar ( outside) Yes Yes Ye

(680.4kg) Hot water supply should be 70% of capacity or greater. Installations will vary. 3-1/4" No change in measurements if connected with drain illustrated. (K-7161-AF or K-7161M-AF) Drop-in cut-out 58-1/2" (148.6cm) x 40-1/2" (102.9cm) Cut-out for undermount K-583 template Minimum access panel: Pump/control 34" (86.4cm) W x 15" (38.1cm) H required PUMP/CONTROL ACCESS PRODUCT DIAGRAM K-772-H2, K-772-N1 Pristine® Bath Whirlpool Page 2 of 2 1019471-4-A THE BOLD LOOK of KOHLER